ST ST7735R - 10.1.2 SWRESET (01 h): Software Reset

ST7735R
V0.2 83 2009-08-05
10.1.2 SWRESET (01h): Software Reset
01H SWRESET (Software Reset)
Inst / Para
D/CX WRX RDX D17-8 D7 D6 D5 D4 D3 D2 D1 D0 HEX
SWRESET
0 ↑ 1 - 0 0 0 0 0 0 0 1 (01h)
Parameter
No Parameter
-
Description
“-“ Don’t care
-If Software Reset is applied during Sleep In mode, it will be necessary to wait 120msec before sending next command.
-The display module loads all default values to the registers during 120msec.
-If Software Reset is applied during Sleep Out or Display On Mode, it will be necessary to wait 120msec before sending
next command.
Flow Chart
SWRESET
Set
Commands
to S/W
Default
Value
Display whole
blank screen
Sleep In Mode
Command
Parameter
Display
Action
Mode
Legend
Sequential
transter