ST ST7735R - 10.1.12 PTLON (12 h): Partial Display Mode On

ST7735R
V0.2 95 2009-08-05
10.1.12 PTLON (12h): Partial Display Mode On
12H PTLON (12h): Partial Display Mode On
Inst / Para
D/CX WRX RDX D17-8 D7 D6 D5 D4 D3 D2 D1 D0 HEX
PTLON
0 ↑ 1 - 0 0 0 1 0 0 1 0 (12h)
Parameter No Parameter -
Description
-This command turns on Partial mode. The partial mode window is described by the Partial Area command (30h)
-To leave Partial mode, the Normal Display Mode On command (13h) should be written.
“-“ Don’t care
Default
Status Default Value
Power On Sequence Normal Mode On
S/W Reset Normal Mode On
H/W Reset Normal Mode On
Flow Chart
See Partial Area (30h)