5.6 Driver errors
When an error occurs using VL53L8CX sensor, the driver returns a specific error. The following table lists the
possible errors.
Table 5. List of errors available using the driver
Target status Description
0 No error
127
User programmed an incorrect setting (unknown resolution, ranging frequency too
high, …)
255 Major error. Usually a timeout error, due to an I2C/SPI error.
other Combination of multiple errors described above
Note: More error codes can be implemented by the host using the platform files.
UM3109
Driver errors
UM3109 - Rev 1
page 17/20
To Next Page
Loading...