STACYC 18EDRIVE - Page 16

P a g e | 16P a g e |
Power Buon”OFF”
Throle→”FULL” posion
HOLD THROTTLE IN FULL
POSITION
Power Buon”ON”
Throle→”FULL” posion
LED→ashing YELLOW
5 yellow ashes
Selecon MODE:
Throle→”LOW” posion
LED→solid RED
(training mode)
Selecon MODE:
Throle→”MID” posion
LED→solid YELLOW
(standard mode)
Selecon MODE:
Throle→”FULL” posion
LED→solid GREEN
(advanced mode)
Select Program:
6. Turn throle, and as the throle moves through the range of power
modes, the Green LED light will illuminate.
7. Hold Throle at the power mode (LED posion) desired
approximately 5 seconds unl “2 short beeps” are heard.
o Red→training mode (slow)
o Yellow→standard mode (medium)
o Green→advanced mode (fast)
Exit Program Selecon:
8. Release throle.
9. All LED lights ash together 1 me with “1 long beep”.
10. LED Light indicang selected power mode will now be illuminated.
o Operaon of cycle will be with the illuminated power
mode. Cycle will stay in this power seng unless changed
as per steps above:
o Red→training mode (slow)
o Yellow→standard mode (medium)
o Green→advanced mode (fast)
Power Buon”ON”
Throle→”FULL” posion
LED→ashing GREEN
5 Green ashes with 5 beeps, all
LEDS stay lit, release throle, all
LED lights o, ready to choose
power model
◀
◀
LED
LED