EasyManua.ls Logo

Stadler Form Q - Product Care and Disposal; Fan Blade Cleaning; Repairs and Disposal Guidelines; Environmental Disposal Instructions

Stadler Form Q
20 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Cleaning
Prior to any maintenance, cleaning and after each use, switch off the appli-
ance and unplug the mains cable (2) from the socket.
Attention: Never submerge the appliance in water (danger of short-circuit).
For external cleaning, rub with a damp cloth and then dry thoroughly.
To clean the fan blades, remove the 8 screws (5) on the back of the ap-
pliance and carefully lift off the protection grille rear. Now you can wipe
the fan blades with a damp cloth and dry well afterwards. After cleaning,
replace protection grille rear on appliance and fasten 8 screws tightly.
Repairs
Repairs to electrical appliances must only be carried out by a qualified
electrical technician. If improper repairs are carried out, the warranty
lapses and all liability is refused.
Never operate the appliance if the adaptor or plug is damaged, after it has
malfunctioned, if it has been dropped or has been damaged in any other
way (cracks/breaks in the casing).
Do not push any object into the appliance.
If the appliance is beyond repair, make it unusable immediately by cutting
through the cable and hand it in at the collection point provided for the
purpose.
Disposal
Do not dispose of electrical appliances in the domestic waste. Please use
the communal collection points.
Ask your local authority if you do not know where the communal collec-
tion points are located.
If electrical appliances are disposed of thoughtlessly, exposure to the ele-
ments may cause hazardous substances to find their way into the ground-
water and from there into the food chain, or to poison the flora and fauna
for many years to come.
Specifications
Rated voltage 120 Volt / 60 Hz
Rated power 45 W
Dimensions 16.9 x 14.2 x 5.9 inch / 430 x 360 x 150 mm
(width x height x depth)
Weight 8.8 lbs / 4.0 kg
Speed 3 settings
Noise level 41 – 58 dB(A)
Complies with
regulation cETL
All rights for any technical modifications are reserved

Related product manuals