Stagetec NEXUS compact TrueMatch

Need help?

Do you have a question about the Stagetec NEXUS compact TrueMatch and is the answer not in the manual?

Summary

1. GENERAL INFORMATION

1.1 INTRODUCTION

Overview of the NEXUS compact TrueMatch and safety regulations.

1.1.3 SUPPORT

Contact methods for technical assistance and questions.

1.2 SAFETY INSTRUCTIONS

Essential safety guidelines for safe operation of the device.

1.2.1 POWER SUPPLY

Warnings about high voltages and handling of power supply components.

1.2.2 OPERATIONAL CONDITIONS

Guidelines for operating temperature, environment, and airflow.

1.3 CLEANING

1.4 SOFTWARE

1.5 DECLARATION OF CONFORMITY

2. SYSTEM DESCRIPTION

2.1 INTRODUCTION

Introduction to the NEXUS compact TrueMatch and its features.

2.1.1 KEY FEATURES

Highlights main features and potential applications of the device.

2.2 HARDWARE

Details about the physical components and interfaces of the device.

2.2.1 FRONT PANEL

Description of the elements on the front panel of the device.

2.2.2 REAR PANEL

3. WEB GUI

3.1 WEB GUI CONNECTION

Steps for connecting to the device's web interface.

3.1.1 WEB GUI CONNECTION WITHIN AN EXISTING DHCP;DNS INFRASTRUCTURE

Connecting via DHCP/DNS network setup.

3.1.2 WEB GUI CONNECTION WITHIN A NETWORK ENVIRONMENT WITHOUT DHCP AND DNS

Connecting without DHCP/DNS using Zeroconf.

3.1.3 TROUBLESHOOTING

Troubleshooting connection issues using ping command.

3.2 CONFIGURING AUDIO-OVER-IP-INTERFACES

3.2.1 OUT-OF-BAND MANAGEMENT, IN-BAND MANAGEMENT

Switching between out-of-band and in-band management modes.

3.2.2 CONFIGURING AES67 PORTS

Steps to configure AES67 ports via the web GUI.

3.2.3 CONFIGURING DANTE PORTS

Steps to configure Dante ports using Dante Controller application.

3.2 PRECAUTIONS

4. APPENDIX

4.1 SUB-D PINOUT SCHEMATICS

Pinout diagrams for various Sub-D connectors.