GB
F.A.Q. – Frequently Asked
Questions
Why
shall I have
to
choose
a
rolling
code
transmitter instead
of a fix one?
The
rolling
code
transmitters
are safer as they
can’t
be cloned and have 200 million
combinations. They change
for every
transmission.
On
the contrary, the
fix code tran-
smitters have
1024 code
combinations. They don’t change
for every transmission.
Can
the control
board
run the operation
of
the motor
with
emergency
batteries?
Yes. To
use emergency batteries use the
kit
supplied
by Stagnoli.
The station
does
not recognise the transmitter.
Why?
Check that you are using the same type of station and
transmitter. It
is possible to
check
the
type of
transmitter
used by
the station from the main screen
and change if
necessary
by
setting the parameter
cf.
Once
the motor gets
to
the stop,
it
turns
back
instead
of
arresting.
Why?
One reason that can make the
control
board loose its
parameters
is that the motor
has been
working
while
unlocked.
To be
sure that the control
board has
found
back
its
parameters, shut
off
the supply, make sure that the motor
is
locked
and
then put
the
supply back to
the control
board. At
the first
START
input, the control
board will find
again its
parameters.
To Next Page
