To Next PageTo Next PageWhy is the clock function not working on my Stahl 200 after being switched off for a long time?
The clock function may not work after the device has been switched off for a while because the battery has failed. The capacitor can only maintain the clock function for approximately four days. In this case, you will need to manually reset the time and date or reset them via a connected system.
General| Power Supply | 24 V DC |
|---|---|
| Processor | Intel Core i5 |
| Operating System | Windows 10 IoT Enterprise |
| Ports | Ethernet; USB; Serial |
| Protection Class | IP65 (front panel) |
| Operating Temperature | 0°C to +50°C |
Description of MT-3x6-A-* operator interfaces.
Description of MT-4x6-A-* panel PCs.
Description of MT-5x6-A-* thin clients.
Technical specifications for MT-3x6-A-* series.
Technical specifications for MT-4x6-A-* series.
Technical specifications for MT-5x6-A-* series.
General power supply information for HMI devices.
Maximum values for external, non-intrinsically safe circuits.
Specifications for external inherently safe optical interfaces.
Maximum values for external, intrinsically safe circuits.
Details on different device variants for MT-3x6, MT-4x6, and MT-5x6 series.
Key safety measures and regulations for installation and operation.
Measures for secure plant operation and protection against cyber threats.
Information and requirements for using cable glands on MT-xx6-A-* devices.
Guidelines for using USB memory sticks and external USB devices.
Details on the four USB interface channels and their connection variations.
Details on terminal assignments, dip switches, and status LEDs.
Details on Windows OS, recovery, and general operation for Panel PCs.
