Need help?Do you have a question about the Stahl 9170/12-12-13 and is the answer not in the manual?
General| Product Type | Repeater |
|---|---|
| Power Supply | 24 V DC |
| Installation | DIN Rail |
| Input | ISbus |
| Output | ISbus |
Details maximum ambient temperature ratings based on isolator version and installation method, with and without ventilation.
Presents maximum and 70% power dissipation values for different types of switching repeaters for engineering purposes.
Explains methods for managing power dissipation within cabinets, including natural convection, forced ventilation, and air conditioning.
Provides the external dimensions of the switching repeater, including a diagram and specific measurements like 'Dimension X'.
Specifies that the switching repeater must be installed outside of hazardous areas.
Details methods for mounting and dismounting the device, including detachable terminals and DIN rail mounting with pac-Bus.
Illustrates connection diagrams for both 24 V DC and 120 V AC power supply types, specifying hazardous and safe area connections.
Explains engineering modes for line fault identification and connection for inductive loads at the output.
Describes the various settings for line fault detection (LF) and line of action inversion (INV) for Channel 1 and Channel 2.
To Next Page
