Need help?Do you have a question about the Stahl SH 6 and is the answer not in the manual?
General| Brand | Stahl |
|---|---|
| Model | SH 6 |
| Category | Lifting Systems |
| Language | English |
Details intended use and prohibited actions for wire rope hoists.
Highlights safety aspects and user responsibilities during operation.
Mandates annual inspections by qualified persons.
Covers supply cables, terminals, fusing, emergency stop, and isolators.
Explains overload cut-off systems and their settings.
Details mains voltage comparison, cable routing, and voltage measurement.
Lists checks required for commissioning by a qualified person.
Outlines daily checks, safety procedures, and operational rules for operators.
Explains operation via the control pendant and associated safety notes.
Details the function and release procedure of the emergency stop button.
Specifies required inspection intervals, including daily checks.
Lists annual inspection items like limit switches, hooks, and overload cut-off.
Outlines annual maintenance tasks like brake checks and greasing rope guides.
Details checking and replacing the RSM hoist motor brake.
Describes the system and testing of limit switches for standard cranes.
Explains how to adjust and set limit switches for top hook positions.
Covers setting limit switches for bottom hook positions and servicing.
Describes the system and testing of limit switches for standard cranes.
Guides on adjusting and setting limit switches for top and bottom hook positions.
Provides troubleshooting steps for non-starting or humming hoists.
Troubleshoots issues related to load lifting and error codes.
Details how to correct cut-off thresholds for the SLE21 load monitor.
To Next Page
