Need help?Do you have a question about the Stahl SH Series and is the answer not in the manual?
Information about the modular SH wire rope hoist program for capacities from 500 to 25,000 kg.
Explanation of symbols used in the document for technical data.
Overview of the SH wire rope hoist's modular structure, technology, and components.
Criteria for selecting a wire rope hoist based on hook path, speed, cycles, and working hours.
Determination of average operating time per working day to select the mechanism group.
Estimating load spectra (light, medium, heavy, very heavy) for hoist selection.
Classification of mechanism groups (light, medium, heavy, very heavy) based on operating time and load.
Details on the 3-pole main isolator with locking facility, supplied without main fuse.
Standard wire rope hoists are equipped with bottom hook blocks as shown in the table.
Dimensions and specifications for return sheave supports.
Details on rope sheaves, including dimensions, material, and order numbers.
Calculation basis for hoist, crab, motor, and motor supply voltages according to standards.
Specifications for hoist motors including power, speed, and electrical data.
Details on pole-changing travel motors for monorail trolleys with speed options.
Wheel loads for monorail trolleys, double rail crabs, and chariots birail.
Explanation of symbols used for lifting capacity, hook path, speed, and dimensions.
Guidelines for selecting AS 7 hoists based on FEM classification and application requirements.
Overview of AS 7 hoist technology, including integrated controls and motor details.
General| Insulation Class | F |
|---|---|
| Power Source | Electric |
| Control Voltage | 24 V DC |
| Protection Class | IP54 |
| Brake Type | Electromagnetic |
| Operating Temperature | -20°C to +40°C |
| Weight | Varies depending on model |
| Lifting Speed | 3-10 m/min |
| Line Speed | 3-10 m/min |
To Next Page