Need help?Do you have a question about the Stahl SH 4008-25 and is the answer not in the manual?
Details the flexible and robust drive technology used in the hoists.
Explains SIMOVERT MASTERDRIVES Vector Control for precise hoist motion.
Describes integrated contactor and variable frequency control for ASF 7 hoists.
Highlights safety features like short-circuit protection and electronic motor protection.
Explains the innovative, hoist-specific control system design and integrated features.
Explains the integrated safety limit switches for top and bottom hook positions.
Provides detailed dimensions and selection table for the stationary SH 3 hoist.
Describes control options for AS 7 hoists, including contactor and frequency control.
Lists different types of overload protection devices employed.
Describes the travel limit switch, its functions, protection, and mounting.
Describes control features like dynamic braking and optional features.
Describes the integrated emergency hoist limit switch for top and bottom hook position.
Explains the option of a brake release device for manual load lowering during power cuts.
Explains standard temperature monitoring for hoist and optional for travel motors.
Details speed ranges for hoisting and travel, with frequency control options.
Describes the standard LAS2 load sensor and SLE2 evaluation for overload protection.
Describes the rope drum brake as an additional safety feature to prevent load falling.
Details SMC overload device with load measurement and motor control features.
Details the design parameters for hoist and crab based on FEM and IEC standards.
Provides detailed technical data for hoist motors with frequency control, including kW, %ED, c/h, voltages, and fuses.
Details technical data for frequency-controlled travel motors for monorail trolleys.
Lists standard and optional motor supply voltages.
Details technical data for frequency-controlled travel motors for double rail crabs.
Provides technical data for hoist motors, including kW, %ED, c/h, voltages, and fuses.
Introduces the SHF program, building on the SH series with frequency control.
Explains how variable speeds increase productivity by optimizing processes.
Highlights cost advantages from using frequency control, such as power savings.
Explains the use of double-grooved rope drums for multiple load points and no hook displacement.
Provides selection table for stationary AS 7 hoists with 2/1 and 4/1 reevings.
Provides dimensions and selection tables for stationary AS 7 hoists.
Provides dimensions and selection tables for double rail crabs.
To Next Page
General