Need help?Do you have a question about the Stahl ST Series and is the answer not in the manual?
General| Protection Class | IP55 |
|---|---|
| Type | Electric Chain Hoist |
| Control Voltage | 42 V |
| Suspension Type | Hook |
| Control | Pendant or radio |
| Chain Grade | 80 |
| Chain Falls | 1 to 2 |
Explains hazard and safety symbols used in the manual for risk awareness.
Details the specific applications and limitations for chain hoist usage.
Outlines operator responsibilities and practices for safe working.
Mandates regular inspections and testing for safety and performance.
Provides guidance on connecting the hoist to the main power supply.
A comprehensive list of tests and checks before initial operation.
Lists the responsibilities and daily checks for the crane operator.
Details the operation and reset procedure for the emergency stop button.
Schedules for routine checks and maintenance based on usage.
Guidelines for inspecting, lubricating, and checking the load chain.
Procedures for testing and adjusting the slipping clutch for overload protection.
Instructions for checking and adjusting the hoist motor brake.
Specifies cable requirements and maximum lengths for mains connections.
To Next Page
