Stallion CWI-B1412 User Manual

Setup and Operation Manual
Stallion CWI-B1412
Features
• Gold Anodized Dovetail Ceramic Blade Guides
• Optional Dual Ball Bearing Blade Guides
• Deluxe Easy Glide Ball Bearing Fence
• Bright Light LED Viewing Strip
• Robust Cast Iron Table Trunnion Bracket
• Cast Iron 14” Wheels
• Quick Release Blade Tension
• Blade Tracking View Window
• One Piece Welded Steel Frame for Rigidity
• Dual Voltage Motor with Overload Protection
Specications
• Blade Length: 112”
• Blade Capacity: 1/8”–3/4”
• Blade Speed: 3250 FPM
• Table tilt range: –5° to 45°
• Table Size: 16” x 20”
• Floor to Table Height: 36.5”
• Throat: 13.5”
• Max Height of Cut: 12”
• Fence: Steel w/ anodized aluminum sides, T-style
• Dust port diameter: 4”
• Motor speed: 1725 RPM
• Floor Space: 33” x 30” x 72”
• Shipping weight: 253 lbs
• Motor (pre-wired 120V): 1.75 HP, 120/240V 14/7 A

Stallion CWI-B1412 Specifications

General

Brand	Stallion
Model	CWI-B1412
Category	Saw
Language	English

Summary

Electrical Requirements

Grounding Instructions

Explains the importance of grounding for shock prevention and how to connect properly.

Circuit Capacity

Extension Cords

Installing the Blade

Installing a Bandsaw Blade

Step-by-step guide for safely installing a new bandsaw blade.

Removing a Bandsaw Blade

Procedure for safely removing an old bandsaw blade.

Tensioning the Blade

Tension Scale

Turning Tension On/Off

Checking Tension

Adjusting Blade Tracking

Checking Tracking

Procedure to check if the blade is tracking correctly on the wheel crown.

Adjusting Blade Tracking

Steps for adjusting the blade's position on the wheels for optimal tracking.

Squaring the Table

Squaring the Blade to the Miter Slot

Procedure for aligning the blade parallel to the miter slot for accurate cuts.

Squaring the Fence

Squaring the Fence to the Miter Slot

Method to align the fence parallel to the miter slot.

Adjusting Fence Alignment

Adjusting the Fence Height

Guide Alignment

Guide Depth from Gullet

How to set the ceramic guide depth 1/16" behind the blade's gullet.

Guide Distance from Blade

Procedure for setting guide distance to the blade for minimal contact.

Thrust Bearing Adjustment

Instructions for setting the thrust bearing 1/16" behind the blade.

Basic Controls

On/Off Switch

Description of the saw's main power switch and lockout feature.

Starting the Saw

Steps for safely starting the bandsaw.

Stopping the Saw

Procedure for safely stopping the bandsaw.

Guard Height Adjustment

Basic Operation

Rip Cutting

Instructions for performing rip cuts, guiding material against the fence.

Resawing

Adjusting for Drift

Measuring Drift

Cross Cutting

Cutting Curves