Stamford UCI - Preparation Procedures; Server Warnings and Precautions

2-4 Compaq ProLiant ML330 Maintenance and Service Guide
Preparation Procedures
A
WARNING: Only authorized technicians trained by Compaq should attempt to repair this
equipment. Because of the complexity of the individual boards and subassemblies, no one
should attempt to make repairs at the component level or to make modifications to any printed
wiring board. Improper repairs can create a safety hazard.
Before beginning any removal and replacement procedure:
1. Open the drive bay door on the front bezel.
2. Power down the ProLiant ML330 by pressing the power button on the front of the server.
IMPORTANT: To completely remove all power from the ProLiant ML330, you must disconnect the power
cord. The front panel power button may not completely shutdown power to the server.
ProLiant ML330. ?
Server Warnings and Precautions
yjv WARNING: To reduce the risk of personal injury from hot surfaces, allow the internal system
/; \ components to cool before touching.
A CAUTION: Protect the server from power fluctuations and temporary interruptions with a
regulating uninterruptible power supply (UPS). This device protects the hardware from damage
caused by power surges and voltage spikes and keeps the system in operation during a power
CAUTION: The server must always be operated with system unit covers on. Proper cooling is