Need help?Do you have a question about the STAMOS S-DIGITRON 200P and is the answer not in the manual?
General| Input Frequency | 50 / 60 Hz |
|---|---|
| Electrode Diameter (MMA) | 1.6 - 4.0 mm |
| 2T/4T | Yes |
| Hot Start | Yes |
| Anti-Stick | Yes |
| Protection Class | IP21S |
| Input Voltage | 230 V |
| Welding Current MMA | 20 - 200 A |
| Duty Cycle | 60 % |
| Gas Post-Flow Time | 1-10s |
| Welding Current TIG | 10 - 200 A |
Explains the safety alert symbol and hazard level definitions like DANGER, WARNING, CAUTION.
Guidelines for safe electrical connections and usage.
Essential personal safety tips for operating the welding tool.
Safety measures to prevent eye injury, burns, fires, and handle combustible materials.
Risks associated with welding fumes and necessary precautions.
Describes the operation panel, its buttons, and indicators.
Tables with recommended welding parameters for different materials.
Detailed procedures for MMA and DC TIG welding.
Lists common problems and their solutions for the welding machine.
To Next Page