Need help?Do you have a question about the Standard Communications TVM Series and is the answer not in the manual?
General| Brand | Standard Communications |
|---|---|
| Model | TVM Series |
| Category | Modulator |
| Language | English |
Explains safety symbols and warnings for user protection, including electrical shock and moisture hazards.
Lists critical safety instructions for installation, operation, cleaning, ventilation, and servicing.
Details the features, capabilities, and design of the TVM450 and TVM550 modulators.
Outlines the enhancements, improved power supply, and specific module differences for TVM550II/IIS.
Highlights the main functionalities, performance aspects, and advantages of the TVM series.
Provides essential operational parameters like power, dimensions, temperature, and altitude range.
Details video input/output levels, frequency response, waveform distortion, and linearity metrics.
Specifies audio input/output parameters, frequency response, pre-emphasis, and noise levels.
Lists critical RF performance metrics including frequency range, output impedance, and spurious outputs.
Defines specifications related to Intermediate Frequency (IF) signal input and output levels.
Details audio input/output, video input/output, and 4.5 MHz output specifications for the CSG60 module.
Outlines technical specifications for the DSG2000 digital stereo/SAP generator, including audio and video.
Identifies and explains front and rear panel controls and connectors for the CMA60 audio module.
Details front and rear panel controls and connections for the CSG60 stereo audio module.
Explains front and rear panel controls and connections for the DSG2000 digital stereo/SAP module.
Step-by-step guide for physically mounting and connecting the modulator unit in a rack.
Explains how to connect the modulator within a headend or supertrunking environment.
Instructions for selecting the desired output channel using the front panel rotary switch.
Procedures for correctly adjusting video modulation levels using the front panel potentiometer.
Explains the function and settings of the FCC Offset switch for frequency alignment.
Guides on configuring stereo, mono, SAP, and auxiliary audio processing modes.
Covers the installation of CBP45 SAW filter and CBP45-1 IF loop options for noise correction.
Provides instructions for installing the CSG60 BTSC stereo generator module.
Details the installation procedure for the CIF450-1 composite IF loop option.
Guides on installing the CALT45 alternate IF input option for switching receivers.
Instructions for installing the SAP2000 option for SAP audio output on TVM550IIS.
Covers the installation of the AGC2000 automatic gain control option.
Illustrates the internal signal flow and components of the TVM450 modulator.
Shows the internal architecture and signal paths for the TVM550 and TVM550II models.
Depicts the block diagram for TVM450S/TVM550S models with integrated CSG60.
Illustrates the internal components and signal flow for the TVM550IIS model.
Outlines the terms and conditions of the product's limited warranty, covering defects and liability.
Details the domestic support program including guarantees, repair services, and lifetime loaner program.
Describes the support program tailored for international users, including warranty and service information.
To Next Page
