Safety Features - continued
Brush / Pad Drive Belt Guard
Brush and Pad Ventilation Inlet
Noise With all tools operating and the dust extraction system operating the noise
emission at a point 1.6 metres high and 1 metre from the centre line of the
machine will be in the region of 80-82dB(A)
Dust The dust extraction system provides an air flow velocity at the face of each dust
capturing duct when all ducts are open and all tools are operating as follows: -
Naumkeag 1.5 mps
Trimmer Section 7.0 mps
LH Scouring Band 6.5 mps
RH Scouring Band 4.5 mps
Polishing Section 2.6 mps
9
To Next Page
Loading...