Standart Horizon QUANTUM AIS GX6000 User Manual

QUANTUM AIS GX6000
25 Watt VHF/FM
Marine Transceiver
Owner’s Manual
z Capable of connecting two optional wired RAM4 or one wired RAM4 and up to four Wireless
RAM4W remote access microphones using SCU-31 wireless access point
z Integrated NMEA 2000 interface supporting all PGNs for Navigation, GPS, AIS and DSC functions
z Integrated Dual Channel AIS (Automatic Identication System) receiver
z GPS Compass, Waypoint and GPS status pages
z Dual Zone 25W PA / Loud Hailer with preprogrammed horn, siren, fog signals and listen back
z Submersible IPX8 (5 feet or 1.5 meters for 30 minutes)
z Integrated 32 Code Voice Scrambler and 4 Code Voice Scrambler
z AIS / AIS SART target display: MMSI, Call Sign, Ship Name, BRG, DST, SOG and COG
z Front panel microphone can be connected to rear panel and extended 20 feet using MEK-4
mic extension kit
z Programmable CPA or TCPA collision avoidance alarms
z Advanced 80 dB commercial Grade Receiver with Local / Distance Attenuator
z Intercom feature allows you to communicate between the radio, RAM4 and Wireless RAM4W
microphones
z Integrated Voice Recorder to play back up to two minutes of RX receive audio

Standart Horizon QUANTUM AIS GX6000 Specifications

General

Weight	3.3 lbs (1.5 kg)
AIS Display	Yes
Frequency Range	156.025 to 163.275 MHz
Channels	All U.S., Canadian, and International
Output Power	1W or 25W
Display	LCD
GPS	Built-in GPS receiver
Waterproof Rating	IPX8
AIS Input/Output	NMEA 0183
GPS Input/Output	NMEA 0183
NMEA Connectivity	NMEA 0183

Summary

Quick Reference Guide

General Information

Packing List

Optional Accessories

Online Warranty Registration

Getting Started

Prohibited Communications

Lists communications prohibited by the FCC.

About VHF Radio

Explains VHF radio frequencies and range principles.

Selecting an Antenna

Discusses antenna gain and selection criteria.

Getting Started

Coaxial Cable

Details coaxial cable types and connectors for antenna connection.

Distress and Hailing (Channel 16)

Step-by-step procedure for making a Mayday call on Channel 16.

Getting Started

Calling Another Vessel (Channel 16 or 9)

Guide on hailing other vessels on Channel 16 or 9.

Getting Started

Making Telephone Calls

Instructions for making radiotelephone calls.

Bridge Channels 13 and 67

Usage and power limits for Bridge channels 13 and 67.

Automated Radio Check Service

How to use the Automated Radio Check service.

Getting Started

Range for AIS Receivers

Explains the reception range for AIS signals.

Accuracy of COG

Accuracy of Course Over Ground (COG) output.

Controls and Indicators

Front Panel Controls

Details the function of each control on the front panel.

Controls and Indicators

Microphone Controls

Explains the controls and functions of the microphone.

Controls and Indicators

Rear Panel Connectors

Identifies and explains the connectors and ports on the rear panel.

Installation

Safety and Warning Information

Safety precautions and RF exposure limits for installation.

Location Selection

Guidelines for choosing a suitable mounting location.

Mounting the Radio

Instructions for mounting the transceiver using the bracket.

Installation

Optional Flush Mount Bracket

Instructions for flush mounting the transceiver with the MMB-84 bracket.

Installation

Electrical Connections

Details power and antenna connections, including ferrite cores.

Connecting External Devices

SCU-31 External GPS Antenna Connection

How to connect the SCU-31 external GPS antenna.

NMEA 0183/HS Connections

Connects to GPS chart plotters via NMEA 0183/HS.

Connecting External Devices

Accessory and NMEA 0183 Cables

Shows wiring for external GPS, chart plotter, and AIS receiver.

Connecting External Devices

NMEA 0183/HS to Chart Plotter (4800 Baud)

Wiring diagrams for NMEA 0183/HS to chart plotter at 4800 baud.

Connecting External Devices

Connection to External GPS or Chart Plotter (4800 Baud)

Wiring for connecting to external GPS or chart plotter.

Connecting External Devices

External PA/HAIL Speaker Connection

Connects external PA/HAIL speakers to the radio.

Rear Microphone Installation

Installs the optional microphone to the rear panel.

Connecting External Devices

SSM-70H (RAM4) Remote Microphone Installation

Instructions for installing the SSM-70H (RAM4) Remote Station Microphone.

Connecting External Devices

External Speaker Connection to RAM4 Mic Cable

Connects an external speaker to the RAM4 mic cable.

Initial Setup

Maritime Mobile Service Identity (MMSI)

Explains MMSI and how to obtain/assign it.

Checking GPS Signal

GPS Configuration

Changing the GPS Time

Adjusts the radio's time display to local time using time offset.

GPS Configuration

Changing the Time Area

Sets the radio to display UTC or local time.

Changing the Time Format

Configures the time display format to 12-hour or 24-hour.