To Next Page
M
Michelle MartinJul 27, 2025
What to do if my StandDesk Ergo Tech STANDING DESK Indoor Furnishing desk has an unknown position?
- MMary LoganJul 27, 2025
If your StandDesk Indoor Furnishing desk has an unknown position, you should reset the desk.
What to do if my StandDesk Ergo Tech STANDING DESK Indoor Furnishing desk has an unknown position?
If your StandDesk Indoor Furnishing desk has an unknown position, you should reset the desk.
What to do if safety limit switch activated on channel 1 of StandDesk Ergo Tech STANDING DESK?
If the safety limit switch is activated on channel 1 of your StandDesk Indoor Furnishing, check for any obstruction or binding that may be due to the frame assembly.
What to do if safety limit switch activated on channel 2 of StandDesk Indoor Furnishing?
If the safety limit switch is activated on channel 2 of your StandDesk Indoor Furnishing, check for any obstruction or binding that may be due to the frame assembly.
What to do if safety limit switch activated on channel 3 of StandDesk Indoor Furnishing?
If the safety limit switch is activated on channel 3 of your StandDesk Indoor Furnishing, check for any obstruction or binding that may be due to the frame assembly.
What to do if Channel 1 is detected missing on StandDesk Indoor Furnishing?
If Channel 1 is detected as missing on your StandDesk Indoor Furnishing, check all cable connections associated with port 1.
What to do if Channel 2 is detected missing on StandDesk Ergo Tech STANDING DESK?
If Channel 2 is detected as missing on your StandDesk Indoor Furnishing, check all cable connections associated with port 2.
What to do if Channel 3 is detected missing on StandDesk Indoor Furnishing?
If Channel 3 is detected as missing on your StandDesk Indoor Furnishing, check all cable connections associated with port 3.
Operating Environment| ambient temperature | +50°F to 104°F (+10°C to 40°C) |
|---|---|
| storage and transportation temperature | 14°F to 158°F (-10°C to +70°C) |
| duty cycle | 10% ~ 6 min. per hour or 2 min. use at full load |
Power| operation | Electric |
|---|---|
| adjustment speed | 1.5" (38.0mm)/second |
| drive leg actuators | Two parallel drive leg actuators with 1x primary (DL6000XNM665518), 1x secondary (DL6000XNS665518), and 1x AC to DC universal power supply (SMPS006) |
Weight and Dimensions| complete frame outside dimension adjustment range | 44.0" - 70.0" (1168.4mm - 1778.0mm) |
|---|---|
| height range | 21.1" - 47.6" (535.9mm~1209.0mm) |
| weight capacity | 220lbs (100kg) |
| worksurface width | 45.0" - 72.0" (1143.0mm - 1828.8mm) |
| worksurface depth | 28.0" - 30.0" (711.2mm - 762.0mm) |
| worksurface thickness | Minimum 0.71" (18.0mm) |
Basic precautions for using electrical furnishings, including warnings on electrical connections, damage, overloading, and continuous operation.
Instructions for placing primary and secondary legs, and then attaching side brackets to the worksurface.
Diagram for frame alignment and instructions for wood screw attachment, feet, and gliders installation.
Steps for installing the switch mount, connecting power components, and installing the center lid.
Guidance on flipping the desk upright, checking power cord reach, and verifying switch functionality.
Procedure to initialize the desk, including error code E01 and step-by-step instructions.
Explanation of digital switch functions like parallel up/down, memory storage, and adjusting initial height.
Guidance on diagnosing issues, understanding standard error codes (E01, E23-E25, E59-E61), and anti-collision features.
