Stanford Research Systems PS350 User Manual

SERIES PS300
HIGH VOLTAGE
POWER SUPPLIES
MODEL PS310
MODEL PS325
MODEL PS350
1290-D Reamwood Ave.
Sunnyvale, CA 94089 U.S.A.
Phone: (408) 744-9040, Fax: (408) 744-9049
Copyright © 1998, 2000
Stanford Research Systems, Inc.
Al Rights Reserved
Revision 2.9
08/2004

Stanford Research Systems PS350 Specifications

General

Weight	10 lbs
Current Resolution	1 mA
Current Set Resolution	1 mA
Current Readback Resolution	1 mA
Display	4-digit LED
Voltage Ripple	1 mV rms
Programming Interface	RS-232
Operating Temperature	0 to 40°C
Power Requirements	100-240 VAC, 50/60 Hz

Summary

Safety and Preparation for Use

Line Voltage Selection and Fusing

Details on setting the correct line voltage and installing the appropriate fuse.

Line Cord and Grounding

Information on using the three-wire power cord and protective ground connection.

Series PS300 Specifications

Electrical Specifications

Detailed electrical parameters including voltage, current, accuracy, and ripple.

Instrument Overview

Front Panel Controls

Description of front panel buttons, switches, LEDs, and digital displays.

Keypad and Parameter Setting

Rear Panel Summary

Power Entry and HV Connectors

Function of power entry module, HV output connector, and polarity selector.

Guide to Operation

Setting Output and Limits

Procedures for setting output voltage, voltage limit, and current limit.

Trip Functions and Reset Modes

Guide to Programming

Remote Communication Setup

Connecting and configuring the PS300 for remote GPIB communication.

Command Syntax and Structure

Programming Commands

Troubleshooting

Operational Faults

Trip Conditions and Protection

Troubleshooting voltage trips, current trips, and primary trips.