Need help?Do you have a question about the Stanford Research Systems PS310 and is the answer not in the manual?
General| Voltage Resolution | 1 mV |
|---|---|
| Power Requirements | 100/120/220/240 VAC, 50/60 Hz |
| Programming Interface | RS-232 |
| Current Resolution | 1 µA |
| Voltage Accuracy | 0.05% of full scale |
| Current Accuracy | 0.05% of full scale |
| Temperature Coefficient | 100 ppm/°C |
| Operating Temperature Range | 0°C to 40°C |
| Humidity | <90% non-condensing |
| Output Voltage | 0 to +1000 V |
| Output Current | 0 to 3 A |
Details about selecting correct line voltage and fuse for the unit.
Information on selecting the correct line fuse for operation.
Notes on the three-wire power cord and protective ground connection.
Detailed electrical parameters for the PS300 series.
Description of front panel controls and features.
How to change the polarity.
Procedure for setting the output voltage.
How to set the voltage protection limit.
Procedure for setting the output current limit.
How to set the current trip value.
List and explanation of error codes.
Rules for forming commands for remote control.
Error messages related to GPIB communication.
How to perform a power-on reset.
How to resolve stuck key issues.
Troubleshooting steps for no high voltage output.
Diagnosing and resolving repeated trip conditions.
Detailed explanation of the voltage control circuitry.
List of components on the main circuit board.
To Next Page
