EX5210R Exciter Installation & Configuration Guide
23
DHCP
Exciters with firmware version 314.54 and above support Dynamic IP (DHCP) and
Static IP configurations.
Static: The IP address and connection settings are specified manually.
Dynamic (DHCP): The DHCP server automatically assigns an available IP every
time the device connects to the network.
Exciters with firmware version 314.54 and above will be set to DHCP by default.
The Exciter’s IP can be changed via the Location Engine; (Select Configuration,
Exciters, IP Settings or right-click an Exciter and select IP Settings. This
command allows you to change the network addressing details of the exciter).
For more information, see the DHCP section in the any Location Engine
Deployment Guide from version 5.1 and above.
To Next Page
Loading...
