This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1)
this device may not cause harmful interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not approved by the party responsible for compliance could void user’s authority
to operate the equipment.
SAFETY GUIDELINES / DEFINITIONS
DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or
serious injury.
WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death
or serious injury.
CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in minor or
moderate injury.
CAUTION: Used without the safety alert symbol indicates potentially hazardous situation which, if not
avoided, may result in property damage.
RISK OF UNSAFE OPERATION. When using tools or equipment, basic safety precautions should always
be followed to reduce the risk of personal injury. Improper operation, maintenance or modification of
tools or equipment could result in serious injury and property damage. There are certain applications
for which tools and equipment are designed. Manufacturer strongly recommends that this product
NOT be modified and/or used for any application other than for which it was designed. Read and
understand all warnings and operating instructions before using any tool or equipment.
2
3
FEATURES
CARACTERÍSTICAS
CARACTÉRISTIQUES
FEATURES
1. 120 volt AC charger
2. 12 volt DC charger (optional accessory)
3. 6 volt DC charging port
(for use with 120 volt AC charger and
12 volt DC charger)
4. Carabineer hanging hook
5. 26 ultra bright LEDs
6. Charging status indicator LED
7. Pivot tube
8. Light mode pushbutton (High/
Medium/Off/Flash)
9. Magnetic base
CARACTERÍSTICAS
1. Cargador de 120 voltios de CA
2. Cargador de 12 voltios de CC (accesorio
opcional)
3. Puerto de recarga de 6 voltios de CC
(para usar con cargador de 120 voltios
de CA y cargador de 12 voltios de CC)
4. Gancho colgante del carabinero
5. 26 ultra brillantes LEDs
6. Indicador de estado de carga LED
7. Tubo del pivote
8. Botón del modo ligero (alto/medio/
apagado/parpadeante)
9. Base magnética
CARACTÉRISTIQUES
1. Chargeur CA de 120 volts
2. Chargeur CC de 12 volts (accessoire en
option)
3. Prise de chargement 6 volts en CC
(pour utilisation avec le chargeur CA de
120 volts et chargeur CC de 12 volts)
4. Crochet de suspension à mousqueton
5. 26 DEL ultra-brillantes
6. DEL indicatrice de charge
7. Tube pivot
8. Bouton-poussoir de mode d’éclairage
(fort/moyen/éteint/clignotant)
9. Base magnétique
1
4
5
8
6
7
9
BACK OF UNIT
DETRÁS DE LA
UNIDAD
3
2
BF0109_BF0109CA_ManualENSPFR_072715.indd 2-3 7/27/2015 2:55:06 PM
To Next Page
Loading...
