To Next PageTo Next Page
Need help?Do you have a question about the Stanley DELUXE CLOSET SYSTEM and is the answer not in the manual?
General| Adjustable Shelves | Yes |
|---|---|
| Color | White |
| Assembly Required | Yes |
| Number of Drawers | 2 |
| Material | Wood |
| Warranty | 1 year limited |
Provides essential safety guidelines for installation and use, including protective gear and child safety.
Alerts users to the risks of drilling into hidden utilities, emphasizing caution to prevent damage or injury.
Provides the Stanley Toll-Free Help Line number and operating hours for installation support and missing parts.
Lists and illustrates all parts included in the Deluxe Closet System kit, identified by letters A through M.
Details the necessary tools for assembling and installing the closet organizer system, including measuring and cutting tools.
Guides on measuring and marking the closet for optimal tower placement, considering centering or offsetting.
Instructions for marking the floor and wall for vertical supports, accounting for baseboards and carpet thickness.
Step-by-step guide to connect vertical support pieces (A, B, C, D, E) using screws and the return piece (A).
Details attaching vertical supports to the back wall and floor using hook and loop fasteners or optional screws.
Instructions on how to insert and secure shelves (F) into the installed vertical supports using shelf brackets (M).
Guidance on determining and marking precise locations for the hanger bar (I) and long shelf (H) on side walls.
Procedure for attaching wall supports (J) to the right-hand wall and preparing hanger bar brackets (L).
Instructions for measuring the distance between hanger bar brackets (L) on the right side for proper alignment.
Guides on cutting hanger bars (I) to size and inserting them into the top brackets with Quiet Glide™.
Instructions for attaching wall supports (J) and shelf/hanger bar brackets (L, M) to the left wall and tower supports.
Details on measuring the distance between shelf brackets (M) to cut the top shelf (H) to the correct length.
Procedure for sliding the cut top shelf (H) into the left shelf brackets (M) and securing it with wall support brackets (N).
Instructions for installing the left hanger bar (I) and placing wall support caps (K) on all vertical supports.
