Stanley E-Protection 2000 E User Manual

Highlights of the helmet's advanced features and safety compliance marks.

Essential checks before welding and understanding helmet markings and standards.

Instructions for adjusting the headgear and helmet-to-face distance for optimal fit.

Guide to selecting welding modes, shade, delay time, and sensitivity.

Procedures for replacing lenses and the ADF cartridge, and cleaning tips.

Introduction to the shade selection chart for different welding processes.

Comprehensive technical data for both E-Protection 2000 E 11 and E-Protection 2000 E models.

Troubleshooting guide for issues like filter not darkening or visibility problems.

Details on the manufacturer's warranty coverage and terms.

Visual guide to helmet assembly components and headgear adjustment mechanisms.

Diagrams illustrating the operation of sensitivity, delay, and shade controls.

Illustrations showing how to replace the front and inside protective lenses.

Chart detailing recommended shade levels for various welding processes and currents.

List of part numbers for common replacement components like cover lenses.

Official declaration by the manufacturer regarding product conformity to EU standards.

Fields for recording warranty purchase details and distributor stamp.