Stanley FATMAX FMHT66719 - EC-Declaration of Conformity; Safety Guidelines Definitions

ENGLISH
40
41
40
English (original instructions)
EC‑Declaration of Conformity
Machinery Directive
Cordless Self‑Drilling Screwdriver
FMHT66719
STANLEY declares that these products described under
Technical Data are in compliance with:
2006/42/EC, EN62841‑1:2015, EN62841‑2‑2:2015.
These products also comply with Directive 2014/30/EU
and 2011/65/EU. For more information, please contact
STANLEY at the following address or refer to the back
of themanual.
The undersigned is responsible for compilation of the
technical file and makes this declaration on behalf of
STANLEY.
Markus Rompel
Vice‑President Engineering, PTE‑Europe
STANLEY , Richard‑Klinger‑Straße 11,
D65510, Idstein, Germany
11.30.2020
a
WARNING: To reduce the risk of injury, read the
instructionmanual.
Definitions: Safety Guidelines
The definitions below describe the level of severity
for each signal word. Please read the manual and pay
attention to thesesymbols.