12
ENGLISH
(Original instructions)
Your charger does not require any maintenance apart from
regular cleaning.
Warning! Before performing any maintenance on the tool,
remove the battery from the tool. Unplug the charger before
cleaning it.
u Regularly clean the ventilation slots in your tool and
charger using a soft brush or dry cloth.
u Regularly clean the motor housing using a damp cloth.
u Do not use any abrasive or solvent-based cleaner.
Lubrication
Your power tool requires no additional lubrication.
Cleaning
Warning! Blow dirt and dust out of the main housing with dry
air as often as dirt is seen collecting in and around the air
vents. Wear approved eye protection and approved dust mask
when performing this procedure.
Warning! Never use solvents or other harsh chemicals for
cleaning the non-metallic parts of the tool. These chemicals
may weaken the materials used in these parts. Use a cloth
dampened only with water and mild soap. Never let any liquid
get inside the tool; never immerse any part of the tool into
a liquid.
Replacement Accessories
Warning! To reduce the risk of serious personal injury, turn
appliance off and remove battery before making any
adjustments or removing/installing attachments
or accessories.
Warning! The use of any accessory not recommended by
STANLEY FATMAX for use with this appliance could
be hazardous.
Warning! Do not use any accessory or attachment other than
those recommended by STANLEY FATMAX on this trimmer.
Serious injury or product damage may result.
Optional Accessories
Warning! Since accessories, other than those offered by
STANLEY FATMAX, have not been tested with this product,
use of such accessories with this tool could be hazardous. To
reduce the risk of injury, only STANLEY FATMAX
recommended accessories should be used with this product.
Consult your dealer for further information on the
appropriate accessories.
Protecting the environment
Z
Separate collection. Products and batteries marked
with this symbol must not be disposed of with
normal household waste.
Products and batteries contain materials that can be
recovered or recycled reducing the demand for raw materials.
Please recycle electrical products and batteries according to
local provisions. Further information is available at
www.2helpU.com
Technical data
SFMCBL730
Voltage V
dc
18
Type 1
Air speed
km/h
MPH
177
110
Air volume
m³/min
CFM
11.6
410
Weight (without battery pack) kg 2.3
Charger SFMCB11 SFMCB12 SFMCB14
Input Voltage V
AC
230 230 230
Output Voltage V
DC
18 18 18
Current A 1.25 2 4
Battery SFMCB201 SFMCB202 SFMCB204 SFMCB206
Voltage V
DC
18 18 18 18
Capacity Ah 1.5 2.0 4.0 6.0
Type Li-Ion Li-Ion Li-Ion Li-Ion
Warning! Your STANLEY FATMAX charger can only be used
to charge STANLEY FATMAX, Li-Ion batteries.
Approx. Charge time in minutes
Battery Pack SFMCB11 SFMCB12 SFMCB14
SFMCB201 72 45 22
SFMCB202 96 60 30
SFMCB204 192 120 60
SFMCB206 288 180 90
Noise values and vibration values (triax vector sum). Blower mode
according to EN50636-2-91
Sound pressure (L
pA
) at work station 90 dB(A), uncertainty (K) 3 dB(A)
Sound power (L
WA
) 96 dB(A), uncertainty (K) 1.3 dB(A)
Vibration total values (triax vector sum) Blower mode according to
EN50636-2-91
Vibration emission value a
h
:< 2.5 m/s
2
, uncertainty (K) 1.5 m/s
2
The vibration emission level given in this information sheet
has been measured in accordance with a standardised test
given in EN50636 and may be used to compare one tool with
another. It may be used for a preliminary assessment
of exposure.
To Next Page
Loading...
Need help?
General
