4
SYMBOLS
The rating plate on your machine may show
symbols. These represent important information
about the product or instructions on its use.
Read these instructions for use
carefully.
Wear eye protection.
Wear hearing protection.
Wear protective gloves.
Wear safety footwear.
It is forbidden to remove or
tamper with the protection
devices and safety devices.
Keep away from rotating parts.
Do not touch parts which are hot
from operation. Serious burns
may result.
Do not smoke or have open flames.
Use extreme caution when storing,
handling and using fuels, as they are
highly volatile and explosive in vapor
state.
Keep children and bystanders off
and away.
SAFETY
General Safety Rules
Understand your Machine
Read and understand the operator’s manual
and labels affixed to the machine. Learn its
application and limitations as well as the specific
potential hazards peculiar to it. Be thoroughly
familiar with the controls and their proper
operation. Know how to stop the machine and
disengage the controls quickly. Make sure to read
and understand all the instructions and safety
precautions as outlined in the Engine Manual,
packed separately with your unit. Do not attempt to
operate the machine until you fully understand how
to properly operate and maintain the Engine and
how to avoid accidental injuries and/or property
damage.
Work area
Never start or run the engine inside a closed
area. The exhaust fumes are dangerous,
containing carbon monoxide, an odorless and
deadly gas. Operate this unit only in a well
ventilated outdoor area.
Never operate the machine without good
visibility or light.
Personal safety
Do not operate the machine while under the
influence of drugs, alcohol, or any medication
that could affect your ability to use it properly.
Dress properly. Wear heavy long pants, boots and
gloves. Do not wear loose clothing, short pants,
jewelry of any kind. Secure long hair so it is above
shoulder level. Keep your hair, clothing and gloves
away from moving parts. Loose clothes, jewelry or
long hair can be caught in moving parts.
Check your machine before starting it. Keep
guards in place and in working order. Make
sure all nuts, bolts, etc. are securely tightened.
G
B
To Next Page
Loading...
Need help?
General
