To Next PageTo Next Page
Need help?Do you have a question about the Stanley SIG 3200 and is the answer not in the manual?
General| Voltage | 230 V |
|---|---|
| Frequency | 50 Hz |
| Fuel Tank Capacity | 15 L |
| Noise Level | 96 dB |
| Weight | 45 kg |
| Engine Type | 4-stroke OHV |
| Fuel Type | Gasoline |
| Starting System | Recoil |
| Outlet Types | 2 x 230V, 1 x 12V DC |
Ensure all electrical cables and connected equipment are in perfect condition.
Dispose of soiled materials properly and recycle packaging.
Connect the generator's earth connection to an external earth.
Add unleaded gasoline to the fuel tank, avoiding overfilling.
Add the recommended engine oil to the correct level.
Follow steps for opening fuel cock, switching on, and pulling starter cord.
Control engine speed for efficiency or maximum power.
Connect appliances to the 230V socket, respecting load limits.
Understand the overload protection system and indicators.
Cool down the generator before switching off the engine and closing the stop cock.
Use the hour meter to track running time for maintenance intervals.
Keep generator parts clean from dirt and dust using a cloth or air.
Drain and refill engine oil as per procedure.
The engine will not start or will stall if oil level is too low.
Clean or replace the air filter regularly for optimal performance.
Check and clean or replace the spark plug for proper ignition.
Follow the schedule for regular checks and servicing.
Prepare the generator for storage by emptying fuel and oil and storing properly.
Wait for the generator to cool down before transporting it upright.
Provide generator type and article number when ordering.
