Need help?Do you have a question about the Stanley SRR1200 and is the answer not in the manual?
General| Power | 1200W |
|---|---|
| No Load Speed | 8000-27000 RPM |
| Plunge Stroke | 55mm |
| Power Source | Corded |
| Horsepower | 1.6 HP |
| Voltage | 230V |
| Collet Size | 6mm, 8mm, 1/4 inch |
Read all safety warnings and instructions. Failure to follow may result in electric shock, fire, and injury.
Keep work area clean and well lit; follow proper electrical safety procedures to avoid shock and hazards.
Ensure only qualified personnel perform service and use only genuine replacement parts.
Specific safety guidelines for operating routers, including handling bits and securing the tool.
Wear appropriate PPE like eye protection, dust masks, and protective clothing for safe operation.
Instructions for securely fitting the router bit into the collet.
How to set and adjust the cutting depth using the tool's mechanisms.
Method for setting cutting depth with a wood reference.
Fine-tuning the router's depth stop for precise cuts.
How to adjust the router's speed for different materials and bits.
Technical specifications for the SRR1200 plunge router.
To Next Page
