© 2014, Pinnacle Products International, Inc.
NEVER LEAVE HEATER UNATTENDED WHILE CONNECTED TO A POWER SOURCE
Problem Cause Solution
Fan stays on when heat shuts
off.
1. Fan runs continuously while
the heater is operating.
1. Heater is operating correctly.
Fan speed stays the same
when changing settings.
1. Fan speed stays constant.
Setting changes amount of
heat output only.
1. Heater is operating correctly.
Heating element does not glow
red.
1. Heating element is made of
stainless steel and will not
glow red to produce heat.
1. Heater is operating correctly.
Do not feel heat or air ow.
1. No power to heater.
2. Desired room temperature
reached.
3. Heater does not heat area
in front of heater, it will
disperse heat throughout
room to heat entire space.
1. Check power connections
/ connect heater to power
supply.
2. Thermostat will shut off once
desired room temperature is
reached. Heater is operating
correctly.
3. Heater is operating correctly.
8
Troubleshooting
To Next Page
Loading...