Need help?Do you have a question about the Stanley STAR 2500 and is the answer not in the manual?
General| Welding current range | 20 - 250 A |
|---|---|
| Output Current Range | 20-250 A |
| Electrode diameter | 1.6 - 5.0 mm |
| Protection class | IP21S |
| Input Frequency | 50/60 Hz |
| Efficiency | 85% |
| Power Factor | 0.73 |
| Welding process | MMA |
| Input voltage | 230 V |
| Duty Cycle | 250A@30% |
Connect earth clamp, electrode holder, and choose polarity for welding.
Power on the machine, select welding current, and start welding.
Turn off the machine and release the electrode from the holder after welding.
To Next Page
