Stanley STHT0-77365 - User Safety Warnings; Laser Radiation Hazard Awareness; General Product Safety Guidelines

2
User Manual
GB
3cm@24cm
2cm@16cm
1cm@8cm
Distance to spot size = 8:1
Distance
SCAN
°C
°F
REF
HIGH
NORMAL
LOW
Measurement
Indicator
Temperture
Difference
Display
3 cm @ 24cm
2 cm @ 16 cm
1 cm @ 8 cm
Distance
Distance to spot size = 8:1
Units/Set
Button
Select/Off
Button
Laser
Emitter
Infrared
Lense
Trigger
Battery
Cover
Units
Threshold
Indicator
Reference
Temperature
Scanned
Temperature
Battery
Level
OFF
SET
F
C
OFF
1F
5F
10F
0.5 C
3C
5.5 C
STANLEY
®
IR Thermometer
The STANLEY IR Thermometer is a non-contact
temperature measuring thermometer. It utilizes
infrared technology and a color changing display
for quick, intuitive feedback. The STANLEY
IR Thermometer can be used to measure the
surface temperature of an object or nd thermal
leaks along walls, molding, ductwork and more.
USER SAFETY
WARNING: Read and understand all
instructions. Failure to follow all instructions
listed below may result in personal injury:
• DANGER: Laser Radiation, avoid direct
eye exposure, serious eye injury can result.
• DO NOT Use optical tools such as
a telescope or transit to view the laser beam.
• ALWAYS position the laser so unintentional
eye contact will be avoided.
• DO NOT operate the laser around children or
allow children to operate the laser.
• DO NOT disassemble. Modifying the product
in any way can increase the risk of laser
radiation.
•
WARNING: Use of controls or
adjustments or performance of procedures
other than those specied in this manual may
result in hazardous laser radiation exposure.
• DO NOT operate in explosive atmospheres,
such as in the presence of ammable liquids,
gases, or dust.
• ALWAYS use only the batteries specied
for use with this product. Use of any other
batteries may create a risk of re.
• ALWAYS store idle product out of reach of
children and other untrained persons. Lasers
may be dangerous in the hands of untrained
users.
• ALWAYS use only accessories that are
recommended by the manufacturer for you
model. Accessories that may be suitable for
one laser may create a risk of injury when
used on another laser.
• DO NOT remove or deface warning labels.
Removing labels increases risk of laser
radiation.
• DO NOT disassemble, service or repair this
product. Repairs performed by unqualied
personnel could result in serious injury.
• DO NOT direct the laser beam toward aircraft
or moving vehicles.
• DO NOT project laser beam onto a reective
surface.
• DO NOT splash or immerse the unit in water.
• ALWAYS turn off the product when not in
use.
• ALWAYS ensure battery is inserted in the
correct manner, with the correct polarity.