Stanley STHT77366 User Manual

Manual Development Template
GT&S Tech Docs Graphics Req #: XXXX
7
Range 6ft-492ft (1.8m-150m)
Output PDF, JPG, Smart Measure Pro File
Share Options Email, Message, Cloud Storage
Mounting Your Smart Measure Pro
1. Centrally place Smart Measure Pro on the back of your device.
2. Ensure that Smart Measure Pro does not obstruct the view from your camera or flash.
3. Firmly squeeze the clamp mechanism onto your device
4. To verify, start your device’s camera app and validate the correct placement.
5. To remove your Smart Measure Pro, press the clamp release button. The clamp will
automatically open and release your device. We recommend compressing the clamp arms when
your Smart Measure Pro is not in use.
NOTE: Ensure that your Smart Measure Pro is mounted securely to your device before taking
measurements, it should not move or rock. Smart Measure Pro should sit flat against the back of
your device and aim squarely with the camera of your device.
Installing Your Smart Measure Pro App
1. The Smart Measure Pro app is available for download from the App Store or Google Play.
2. On your device, launch the App Store or Google Play.
3. Within the search box, search for Stanley Smart Measure Pro
4. Follow the instructions to download and install the app on your device.
5. Once installed, the Smart Measure Pro app icon will appear on your device’s screen.
6. You can launch the Smart Measure Pro app and test it out in Demo mode. Note however that
without the Smart Measure Pro unit, you cannot generate accurate measurements.

Stanley STHT77366 Specifications

General

Brand	Stanley
Model	STHT77366
Category	Measuring Instruments
Language	English