Manual Development Template
GT&S Tech Docs Graphics Req #: XXXX
6
End of Life
DO NOT
dispose of this product with household waste.
PLEASE RECYCLE
in line with local provisions for the collection and disposal of electrical and electronic
waste.
Declaration
of
Conformity
This product conforms with IEC60825:2014.
For further details please refer to www.stanleyworks.com
Maintenance and Care
DO NOT
allow to get wet. Damage to internal circuits may result. Laser tool is not waterproof.
DO NOT
leave laser tool in direct sunlight or expose it to high temperatures. The housing and some
internal parts are polymeric materials and may become deformed at high temperatures.
DO NOT
store the laser tool in a cold environment. Moisture may form on interior parts when warming up.
This moisture could fog up laser windows and / or cause corrosion of internal circuit boards.
NOTE:
When working in dusty locations, some dirt may collect on the laser window. Remove any
moisture or dirt with a soft, dry cloth.
DO NOT
use aggressive cleaning agents or solvents.
Charging Your Smart Measure Pro
Your Smart Measure Pro has an internal, non-removable, rechargeable battery. Do not attempt to remove
the battery from the device as you may damage the device. To charge the unit, connect the USB charging
cable into the micro USB charging port on the unit and then plug it in to an appropriate USB port. Longest
life and best performance can be obtained if the battery pack is charged when the air temperature is
between 18° and 24 °C (65 °F –75 °F). DO NOT charge the battery pack in an air temperature below +4.5
°C (+40 °F), or above +40.5 °C (+105 °F ). This is important and will prevent serious damage to the
battery pack. NOTE: While the unit is charging, the LED indicator will flash green. When charging is
complete, the LED indicator will be solid green. The Bluetooth® device will fully recharge in 4 hours or
less.
Supported Devices
Stanley Smart Measure Pro currently supports the following:
Apple iOS iOS 8.0 or later
Google Android v4.4 or later
*Must support Bluetooth Smart (v.4 – low energy)
For list of compatible devices, visit: www.smartmeasurepro.com
*The clamp included with your Smart Measure Pro will fit on any device that is between 45mm and 80mm
wide (inclusive of any case that may be on the device).
Smart Measure Pro Functionality
The Smart Measure Pro app contains core measurement functionality. As the Smart Measure Pro app
evolves, each app update will introduce additional features and capabilities.
Smart Measure Pro has the following functionality:
To Next Page
Loading...
Need help?
General
