Stanley TLX-350FM - Step 1: Preparation; Select Correct Screws for TV; Adjust VESA Plate and Separate Components

Use the wrench(G) to loosen 2
nuts at upper side of Vesa
plate, leaving a clearance of
about 5 mm from Vesa plate.
Note：Do not detach the 2
nuts.
1
1
Check what screw size will fit
in your TV. (B1,C1,D1,C3,D2)
Note: If Your TV has a curved
back you may need to use
longer screws with spacers
( F1,F2).
2
Step 1: Preparation
M5x14 (x4)
B1
M6x14 (x4)
C1
M8x20 (x4)
D1
M6x30 (x4)
C3
M8x30 (x4)
D2
5~6mm
G
G
2
Remove 2 nuts at under side,
and remove VESA plate(A)
from Wall Mount(H2).
3
3
4