EasyManua.ls Logo

Stanley TLX-350FM - User Manual

Stanley TLX-350FM
17 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Model : TLX-350FM
TV Mount Installation Guide
Thank you for choosing Stanley – the hardware of choice
for Architects, Contractors, and Home Owners for its quality,
performance and dependability.
Following is your step-by-step instructions for an install
made easy.
If you get stuck, give customer service a call at 1-855-816-6868
You can also reach us at contact@stanleymounts.com
T
hank
y
ou
f
f
or Architec
t
per
f
ormanc
e
Following is
made eas
y.
Question and Answer IconNeed help?

Do you have a question about the Stanley TLX-350FM and is the answer not in the manual?

Stanley TLX-350FM Specifications

General IconGeneral
BrandStanley
ModelTLX-350FM
CategoryTV Mount
LanguageEnglish

Summary

Getting Started

Pre-installation Checks

Verify TV compatibility and wall type before installation.

Required Tools for Installation

Lists essential tools needed for the TV mount installation process.

Parts and Hardware Identification

VESA Plate and Wall Mount Components

Identifies the main VESA plate and wall mount components.

Hardware for TV and Wall Mounting

Details VESA extension plates, screws, bolts, anchors, and washers.

Included Installation Tools

Identifies hex keys, wrenches, and level included for installation.

Step 1: Preparation

Select Correct Screws for TV

Guides selecting the appropriate screws for attaching the VESA plate to the TV.

Adjust VESA Plate and Separate Components

Adjusts VESA plate nuts and detaches it from the wall mount.

Step 2: VESA Plate Configuration

Configure VESA Plate Based on TV Pattern

Matches the VESA plate to TV screw hole patterns and shows configurations.

Step 3: Attach TV to Mounting Plate

Secure VESA Plate to TV Back

Instructions for securing the VESA plate to the TV using appropriate hardware.

Important: Hand Tighten Screws

Emphasizes hand-tightening with a screwdriver to prevent TV damage.

Step 4 A: Wall Plate Installation on Drywall

Locate and Mark Wall Studs

Uses a stud finder to locate and mark the center of the wall stud.

Align Mount and Mark Drill Points

Levels the mount and marks pilot hole locations on the wall.

Drywall Installation Specifications

Specifies minimum wood stud size and maximum drywall thickness.

Drill Pilot Holes and Secure Wall Plate

Drills pilot holes and tightens bolts to secure the wall plate.

Ensure Level Mounting During Tightening

Advises using a level before fully tightening screws.

Step 4 B: Wall Plate Installation on Concrete

Mark Pilot Holes on Concrete Wall

Levels the mount and marks pilot hole locations on concrete.

Drill Pilot Holes and Insert Anchors

Drills pilot holes and inserts anchors into concrete.

Concrete Installation Precautions

Specifies minimum concrete depth and warns against drilling into mortar.

Secure Wall Plate to Concrete Surface

Aligns the wall plate with anchors and tightens bolts with washers.

Ensure Level Mounting on Concrete

Advises using a level before fully tightening screws.

Step 5: Install Wall Covers

Attach and Secure Wall Rail Covers

Snaps wall rail covers onto the wall plate and confirms lock engagement.

Step 6: Hang Your TV

Two-Person Lift Recommended for TV

Advises that two people are required to safely lift the TV.

Attach and Secure TV to Wall Mount

Lifts the TV and secures the mounting plate to the wall mount by tightening nuts.

Step 7: Cable Management

Route Cables Using Integrated Clips

Uses cable clips on the arms to route cables to the TV's connection ports.

Step 8 A: Tension Adjustment for Tilting

Adjust TV Tilting Tension with Hex Keys

Uses hex keys to adjust nuts for desired TV tilting tension.

Step 8 B: Dynamic Arm Tension Adjustment

Adjust Arm Tension Based on TV Weight

Positions the arm and uses hex keys to adjust tension based on TV weight.

Limited Warranty Information

Product Warranty Coverage and Exclusions

Outlines warranty period, coverage, and conditions that void the warranty.

Warranty Claims and Contact Information

Provides instructions for making a warranty claim and contact details.

General Disclaimer and Safety

Manual Accuracy and Update Disclaimer

States manual's accuracy efforts, potential changes, and disclaims responsibility.

Installation Safety and Wall Requirements

Warns about risks and details wall construction and load support requirements.

Related product manuals