Stanley TLX-350FM - Step 4 A: Wall Plate Installation on Drywall; Locate and Mark Wall Studs; Align Mount and Mark Drill Points; Drywall Installation Specifications

Use a stud finder to locate 1
stud. Then draw a vertical line
to mark the center of the stud.
Level the wall mount and align
it with the center of the studs.
Make 3 Pencil marks to
indicate where to drill.
2
1
Tools Required:
Pencil Stud Finder
12
Caution: The minimum size of the woodstud must be 1/2”x 3 1/2”
and the thickness of the drywall must not exceed 5/8”.
!
Level
Wood stud
Step 4A: Install Wall Plate on Drywall with Wood Stud
Note : For Concrete Skip to Step 3B
level
7