Stanley TLX-350FM - Drill Pilot Holes and Secure Wall Plate; Ensure Level Mounting During Tightening

Remove the Wall plate and drill
pilot holes with a 3/16” drill bit.
3
Tools Required:
Drill
3 in.
(75 mm)
3/16 in.
(5 mm)
3
3/16’’
Drillbit
Align the wall plate with the
pilot holes and insert 3 bolts
through the washer in the pilot
holes and tighten.
Note: Use bubble level to level
the mount before fully
tightening all screws.
4
4
Level
13mm
(1/2 in)
Wrench
8