Stanley TLX-350FM - Step 4 B: Wall Plate Installation on Concrete; Mark Pilot Holes on Concrete Wall; Drill Pilot Holes and Insert Anchors; Concrete Installation Precautions

Level the wall mount and make
5 marks with pencil to show
where to drill the pilot holes.
Remove the wall mount and
drill the pilot holes with a 3/8”
drillbit.
2
1
2
1
Step 4B: Install Wall Plate on Concrete
Tools Required:
Pencil
Drill
3/8’’
Drillbit
3/8 in.
(10 mm)
3 in.
(75 mm)
Caution: The minimum depth of the concrete must be 8”.
Do not drill pilot holes into the mortar between the concrete.
!
Level
level
9