EasyManua.ls Logo

Star EV BN72-14-AC-D - User Manual

Star EV BN72-14-AC-D
24 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Owner’s Manual and Service Guide
Enclosed Bus:
BN72-14-AC-D and BN72-11-AC-D (Wheelchair Accessible)

Questions and Answers

  • H
    hubbarddanielAug 17, 2025
    Why is my Star EV BN72-14-AC-D locking control when vehicle starts running?
    • Z
      Zachary RomanAug 17, 2025
      If the control locks when your Star EV Automobile starts running, preventing speed adjustment, it could be due to several reasons. The terminals of the solenoid might be sticking together (check or repair), there could be a controller failure (change), a potentiometer failure (repair or change), an internal short of the motor (repair or change), the motor is assembled too tight or blocked (repair or change), an accelerator failure (repair or change), or there might be normal power at low speed, weak power at high speed (check or change).
  • B
    Brian PerezAug 20, 2025
    What to do if my Star EV BN72-14-AC-D has brake fail?
    • T
      Tina BrockAug 20, 2025
      If the brakes fail on your Star EV Automobile, it could be due to several reasons: The master cylinder and/or wheel cylinder may be damaged or leaking oil (check, eliminate, change), the brake fluid might be insufficient or empty (add fluid), air could have entered the oil pipe (let air out), the free travel of the brake pedal might be too long, or the clearance of the arrester could be too big (adjust), or the brake drum could be worn out or distorted (change).
  • J
    Judy StephensAug 25, 2025
    What causes abnormal sound when running Star EV Automobile?
    • K
      Kayla LongAug 25, 2025
      An abnormal sound when your Star EV Automobile is running (specifically from the transmission system) can be caused by several factors. The clearance of the rear axle decelerating gear might be too big, or the decelerating gear could be broken (adjust, change). Alternatively, the transmission cross shaft could be worn out (change), the gear of transmission could be worn out or damaged (change), the flange bearing could be damaged (change), the motor bearing could be damaged (change), or the gear liquid could be deficient or empty (add gear liquid).
  • K
    Kevin ShortAug 28, 2025
    What causes steering heavy in Star EV Automobile?
    • H
      Heather JohnsonAug 28, 2025
      Heavy steering in your Star EV Automobile can be attributed to a few potential issues. The pressure of the front tire might be deficient (check the pressure and inflate). It could also be that the screw plug of the redirector is too tight (adjust), there's a lack of lube in the redirector (maintain/add lube), or the toe-in is abnormal (adjust).
  • C
    Charles BarnesAug 31, 2025
    What to do if Star EV BN72-14-AC-D Automobile cannot change direction?
    • K
      Keith CooperSep 1, 2025
      If your Star EV Automobile cannot change direction and only runs in one direction, it could be due to a F&R switch failure (change) or a controller failure (change).
  • C
    cynthiamooreSep 4, 2025
    Why is my Star EV BN72-14-AC-D deflected running?
    • J
      Joshua CamachoSep 4, 2025
      If your Star EV Automobile is deflected running, it could be due to several reasons related to the driving system. The pressure of the two front tires might be different (inflate). The toe-in could be too big or too small (adjust). The tightness of the left and right drum bearing of the front wheels might be different (adjust). The brake of one wheel could be too tight (adjust or change). The spring shock absorber might be abnormal (change), or the front suspension could be loose (change).
  • A
    Alicia McculloughSep 8, 2025
    What causes braking drag in Star EV Automobile?
    • C
      Christine ZamoraSep 8, 2025
      Braking drag in your Star EV Automobile could stem from several issues within the brake system. The brake pedal might have no free travel (adjust). The clearance between the brake shoe and drum could be too small, or the releasing spring might be disabled (adjust or change). The piston of the wheel cylinder might be ineffective (check or change). The piston of the master cylinder might be ineffective (change spring), or the parking brake could be ineffective (change spring).
  • D
    dshepardNov 12, 2025
    What to do if my Star EV BN72-14-AC-D Automobile doesn't move after turning it on?
    • T
      Thomas GuerreroNov 12, 2025
      If your Star EV Automobile doesn't move after turning the power key and pressing the accelerator, there are several potential causes. It could be due to loose or open connectors in the circuit (tighten or connect them), an open fuse in the controller or main circuit (change the fuse), loose or disconnected battery cables (tighten or change them), a broken power key (change it), a broken voltmeter (change it) or improperly connected battery terminals (adjust them). In some cases, it may be due to an improper operating procedure (operate properly), controller failure (check or change it), solenoid failure (check, repair, or change it), accelerator failure (repair or change it) or motor failure (repair or change it). Also, make sure the parking brake is loosened and that there's no over-heat ...

Star EV BN72-14-AC-D Specifications

General IconGeneral
BrandStar EV
ModelBN72-14-AC-D
CategoryAutomobile
LanguageEnglish