Star EV Classic-Series

Questions and Answers

H
harmonscottAug 2, 2025
What to do if my Star EV Classic lack breaking force?
- B
  Brenda ChaseAug 3, 2025
  If your Star EV Golf Car lacks braking force, several factors could be the cause. There might be excessive space between the brake shoes and drum, requiring adjustment. Oily dirt on the brake shoes or drum can diminish braking effectiveness and should be removed. Air in the brake pipe needs to be purged, and any brake pipe leaks should be repaired or the pipe replaced. Worn brake shoes should be replaced. Finally, an improperly adjusted or blocked brake cable needs adjustment.
S
Samantha CrosbyAug 10, 2025
Why is the axle housing gear and bearing damaged and noisy in Star EV Classic Golf Cars?
- J
  James WheelerAug 10, 2025
  If the axle housing gear and bearing are damaged and noisy in your Star EV Golf Cars, it could be due to several reasons. Insufficient or improper gear oil requires oiling the gear or replacement. An incorrectly assembled bearing should be assembled correctly. Adjust or replace the brake shoe pin shim or the interval. Ensure the gear between axle 1 and 2 is tightly connected by adjusting it correctly. If the final drive is too noisy, consider replacing the gear. If axle 1 is grinding gears, adjust or replace it. Finally, a bent rear axle (possibly due to overloading) should be replaced.
M
melissaguerraAug 17, 2025
How to fix a brake that is difficult to release completely on Star EV Classic Golf Cars?
- R
  robin64Aug 17, 2025
  If the brake is difficult to release completely on your Star EV Golf Cars, the brake pedal might not be bouncing back smoothly, requiring a replacement. Alternatively, the brake shoe could be warped or broken, needing refitting or replacement. A blockage on the transmission could also be the cause, which would need refitting or replacement.
W
Wanda ArmstrongAug 26, 2025
What to do if Star EV Classic have oil leaks?
- G
  Gregory TranAug 26, 2025
  If your Star EV Golf Cars are leaking oil, it could be due to a damaged oil seal, which would need replacement. Alternatively, there might be too much oil, requiring an adjustment of the oil level.