Assembling the appliance:
- Install the main body (17) into the base (18) , and use the base lock nut(20) to
screw on the base tight.
- Power connection line (14) link together, and SS holder (13) into main body
and fasten by fixed screw (15).
- Install the rear grill (7) and the grill circle on the motor, and use grill lock net
(6) to fasten.
- Install the blades (5) on to the motor axis, and use the grill lock net (4) to
fasten.
- Install Misting board (1) on the front grill (2) and screw it (3).
- Put the front grill (2) and rear grill (6) together, and screw to fasten by grill
ring(10).
- Pull the mist tube (21) through into misting board (1).
Safety advice and warnings
- This appliance can be used by children aged from 8 years and above and
persons with reduced physical, sensory or mental capabilities or lack of
experience and knowledge if they have been given supervision or instruction
concerning use of the appliance in a safe way and understand the hazards
involved.
- Cleaning and user maintenance shall not be made by children unless
they are supervised.
- This appliance is not a toy. Children should be supervised to ensure
that they do not play with the appliance. Applicable if the user has to
realize any installation operation (for example: assembly the grill…):
- Ensure that the fan is switched off from the supply mains before start any
installation or assembly operation. Mandatory if the guard has to be removed
for cleaning purposes
- Disconnect the appliance from the mains before undertaking any cleaning
task. Ensure that the fan is switched off from the supply mains before
removing the guard. Choose the adequate sentence/s depending of after
service kind:
- If the connection to the mains has been damaged, it must be re-placed,
take the appliance to an authorized technical support service.
To Next Page
Loading...