To Next PageTo Next Page
Need help?Do you have a question about the Star Micronics SM-L200 and is the answer not in the manual?
The SM-L200 Charging Cradle is an essential accessory designed to facilitate the charging of the SM-L200 printer, ensuring its continuous operation and readiness for use. This guide provides comprehensive instructions for the proper installation, usage, and maintenance of the charging cradle, emphasizing safety and optimal performance.
The primary function of the SM-L200 Charging Cradle is to provide a stable and efficient charging platform for the SM-L200 printer. It acts as a dedicated power interface, connecting the printer to an external power source to replenish its battery. The cradle is designed to securely hold the printer during the charging process, preventing accidental disconnections and ensuring a consistent power flow. It incorporates visual indicators, specifically LEDs, to communicate the charging status to the user, making it easy to monitor the battery's progress. When the printer is inserted correctly, the cradle initiates charging, and a red LED illuminates to indicate that the battery is being charged. Upon completion of the charging cycle, the LED changes to green, signaling that the battery is fully charged and the printer is ready for use. The cradle is powered via a USB connection, which can be connected to a compatible USB port or a dedicated USB charger. This design ensures versatility in power sourcing, allowing users to charge the printer in various environments. The cradle is engineered to provide a safe and reliable charging environment, protecting both the printer and the user from potential electrical hazards.
The SM-L200 Charging Cradle is designed for ease of use, incorporating several features that enhance the user experience. To begin charging, the printer must first be turned off. This is a standard safety and efficiency measure to ensure proper charging. The printer is then slid into the charging cradle, guided by its design to ensure a correct and secure fit. Once the printer is properly seated, the charging process automatically commences. A red LED on the cradle illuminates, providing a clear visual indication that charging is in progress. This immediate feedback allows users to confirm that the printer is correctly connected and receiving power.
The charging time for a fully depleted battery typically ranges from 4 to 5 hours, though this can vary depending on the type of charger used. Once the battery is fully charged, the red LED will change to green, signaling completion. This clear visual cue informs the user that the printer is ready for use and can be removed from the cradle. To remove the printer, it is simply slid upwards and out of the cradle. The cradle's design ensures a smooth insertion and removal process, minimizing effort and potential damage to the printer or the cradle itself.
The cradle's power input is a standard 5V DC, 0.5A, making it compatible with a wide range of USB power sources. Users are advised to use a communication port certified by USB compliance or a dedicated USB charging port for optimal performance and safety. The cradle's compact and stable design allows it to be placed on various surfaces without concerns of instability, making it suitable for diverse work environments. Its intuitive LED indicators simplify the monitoring of the charging status, providing immediate feedback on whether the printer is charging, fully charged, or if an error has occurred.
Maintaining the SM-L200 Charging Cradle involves adhering to several guidelines to ensure its longevity, safety, and optimal performance. Proper placement is crucial; the cradle should be kept away from direct sunlight and locations subject to excessive heat, as high temperatures can negatively impact its components and the charging process. Similarly, it should not be used or stored in areas with high humidity or excessive dust, as these environmental factors can lead to internal damage or malfunction.
Stability is another key aspect of maintenance. The cradle should always be placed on a stable and level surface to prevent it from tipping over, which could cause damage to both the cradle and the printer. Strong vibrations or shocks should be avoided, as these can also lead to internal damage. Ensuring sufficient space around the installation area is recommended to facilitate easy usage and prevent accidental impacts.
A critical safety precaution involves the charging contact part. Users must avoid short-circuiting this area with metal objects, such as clips. Such an action could lead to overheating, ignition, or the emission of smoke, posing a significant safety risk. Similarly, care must be taken to prevent water or any foreign objects from entering the charging cradle. Ingress of liquids or debris can cause electrical shorts, damage the internal circuitry, and potentially lead to fire or electric shock.
The LED indicators on the cradle also serve as a diagnostic tool for maintenance. If the LED is off when the printer is inserted and connected to power, it indicates an error condition or a lack of power from the USB port or charger. This immediate feedback allows users to troubleshoot potential issues, such as checking the power connection or the functionality of the USB port. By following these maintenance guidelines, users can ensure the SM-L200 Charging Cradle remains in excellent working condition, providing reliable charging for the SM-L200 printer over an extended period. Regular adherence to these practices contributes to the overall safety and efficiency of the device.
General| Charger type | Indoor |
|---|---|
| Compatibility | Star Micronics SM-L200 |
| Power source type | USB |
| Charger compatibility | Portable printer |
| Product color | Black |
| LED indicators | Charging |
| Input current | 0.5 A |
| Input voltage | 5 V |
| Harmonized System (HS) code | 85044095 |
Weight and Dimensions| Depth | 94.03 mm |
|---|---|
| Width | 116.03 mm |
| Height | 80.45 mm |
| Weight | 106 g |
