Need help?Do you have a question about the Star 35SSA and is the answer not in the manual?
This document provides installation and operation instructions for the Star Manufacturing Combination Hot Dog Steamer and Bun Warmer, covering models 35SSA, 35SSAD, and 70SSA. It outlines the proper procedures for setting up, operating, and maintaining the appliance to ensure safe and efficient use in commercial food service environments. The manual emphasizes safety precautions, operational guidelines, and troubleshooting tips to help users achieve optimal performance and longevity from their equipment.
The primary function of this appliance is to steam hot dogs and warm buns simultaneously, making it a versatile tool for food service operations. It is designed for commercial use, intended to be operated by trained and experienced personnel, and is not suitable for consumer use in residential settings. The unit features separate compartments for hot dogs and buns, allowing for efficient preparation and holding of both items at serving temperatures.
To begin, the unit should be placed on a level surface. Water is added to the water pan, with specific quantities recommended for different models (approximately 9 quarts for Model 35 and 12 quarts for Model 70). An additional 2 quarts can be added if the juice pan is not in use. The manual strongly recommends using distilled water to prolong the life of the heating element and prevent scale buildup. If tap water is used, regular cleaning of mineral deposits will be necessary, with frequency depending on local water conditions.
Once water is added, the unit is turned on by setting the switch to the "ON" position and the thermostat control to "HIGH" to generate steam. The normal heat-up time is approximately 30 minutes, which can be reduced by using hot water. After pre-heating, hot dogs are placed on the top or bottom hot dog shelf, ensuring they are arranged for free circulation of steam. A full load of refrigerated hot dogs typically takes about 45 minutes to reach serving temperature.
Once the hot dogs reach serving temperature, the thermostat control should be adjusted to a lower setting (typically 3 or 4). At this point, buns can be added to the wire rack in the bun compartment. The steam level in the bun compartment can be controlled by opening the water fill compartment at the front of the bun compartment. To hold the product at serving temperature, the thermostat control should remain at setting 3 or 4. It is important to keep the door closed when not serving to maintain temperature and steam.
The unit is equipped with a low water level indicator. When this light illuminates, water must be added to maintain the water level. Adding hot water is recommended for best results. A critical safety instruction is to never operate the unit dry, as this can severely damage the heating element.
Daily maintenance is crucial for the longevity and proper functioning of the hot dog steamer and bun warmer. At the end of each day's operation, the power cord should be disconnected from the outlet. Any remaining hot dogs and buns should be removed. The unit must be allowed to cool before draining the water through the drain pipe.
The internal components of the steamer should be removed for cleaning. The suggested order for removal is: divider, wire bun rack, top hot dog shelf, bottom hot dog shelf, bun shelf, and finally, the juice tray. After cleaning, the components should be reassembled in reverse order.
The manual provides guidance for common operational issues:
Using tap water will inevitably lead to scaling due to mineral deposits, which can impair the unit's performance. The frequency of descaling depends on local water quality, but it can become necessary within a few days. Using distilled water is highly recommended to prevent scaling.
To remove scaling from the tank:
The manual includes safety symbols to alert users to important operating and maintenance instructions. A "CAUTION" symbol indicates that the equipment is designed for commercial use only and should not be operated without water to prevent damage to the heating element. A "WARNING" symbol emphasizes that the steamer is equipped for a specific voltage, and connecting it to any other type of current will cause serious damage.
Star Manufacturing provides a limited equipment warranty, covering defects in material and workmanship for one year from the date of original installation. Repairs under warranty must be performed by a Star-authorized service agency. The warranty covers normal labor charges within 50 miles of an authorized service agency, with the owner responsible for charges beyond this distance or for overtime premiums. The warranty excludes damage from misuse, improper installation, lack of maintenance, or unauthorized modifications. It also specifies that certain portable equipment should be taken or shipped to the closest authorized service agency, transportation prepaid. The document also lists examples of portable equipment and contact information for the service department.
This comprehensive guide ensures that users can effectively operate and maintain their Star Combination Hot Dog Steamer and Bun Warmer, maximizing its performance and lifespan in a commercial kitchen setting.
General| Model | 35SSA |
|---|---|
| Type | Food Warmer |
| Voltage | 120V |
| Material | Stainless Steel |
| Number of Pans | 1 |
To Next Page
