Need help?Do you have a question about the StarFive VisionFive 2 and is the answer not in the manual?
General| SoC | StarFive JH7110 |
|---|---|
| GPIO | 40-pin GPIO header |
| Power Supply | 5V/3A via USB-C |
| Dimensions | 100mm x 72mm |
| CPU | Quad-core SiFive U74 |
| GPU | Imagination Technology BXE-4-32 |
| RAM | 4GB / 8GB LPDDR4 |
| Storage | MicroSD card slot |
| Connectivity | Gigabit Ethernet, Wi-Fi, Bluetooth |
| Video Output | HDMI 2.0 |
| Audio | HDMI, 3.5mm audio jack |
| Expansion | M.2 slot |
| Operating System Support | Linux |
Legal disclaimers and copyright notice for the documentation.
Provides contact information for StarFive support and inquiries.
Introduces the purpose and scope of the quick start guide.
Records changes made in different versions of the document.
Overview of VisionFive 2's key hardware and software capabilities.
Detailed technical specifications of the VisionFive 2 board.
Visual identification of components and connectors on the VisionFive 2.
Pin assignments for VisionFive 2's GPIO header and interfaces.
Essential hardware components for setting up VisionFive 2.
Guide on connecting a cooling fan for the VisionFive 2.
Instructions for preparing the OS on a micro-SD card for VisionFive 2.
Steps for accessing Debian OS on VisionFive 2 via HDMI or SSH.
Procedure to resize partitions on storage media for full utilization.
Configuration steps to allow root access via SSH on VisionFive 2.
Guide on updating the system's bootloader (SPL and U-Boot).
Methods to restore the bootloader if it becomes corrupted.
Links to essential code repositories for VisionFive 2 development.
Configuration options for selecting the boot mode of VisionFive 2.
To Next Page
