STARFRIT 024015 - Product Usage and Preparation; Before Initial Use; How to Use

5
BEFORE INITIAL USE
1. Remove all parts & accessories and dispose of packaging.
2. Check that all accessories are complete and the unit is not damaged.
3. Add water into water tank to the max level and brew water for several times without tea,
then discard the water.
4. Clean all detachable parts thoroughly with warm water.
HOW TO USE
READ THE INSTRUCTIONS BEFORE USE
A. Open the water tank cover and fill the water tank with drinking water. The water level should
not exceed the MAX level as indicated on the water gauge.
B. Place the tea funnel into the funnel support, make sure it is assembled correctly; otherwise
the iced tea and iced coee maker cover cannot be closed. (Fig. 1)
C. Place permanent filter basket in the funnel. (Fig. 2)
D. Add ground tea into filter basket.
Note: Adjust to taste and strength. Green and herbal teas may require additional amounts
to achieve desired strength and flavor. All amounts are based on making 900ml of iced tea
or coee. However, you can adjust according to personal taste.
TEA MEASUREMENT GUIDE (MAKE 900 ML)
Tea bags (regular format) 6 to 12 bags (2g)
Tea bags (family format) 2 to 6 bags (6-7g)
Tea leaves 4-8 tablespoons, depending on type
Green tea bags 6 to 12 bags
Herbal tea bags 6 to 12 bags
Ground coee (coarse to fine grind) 8 to 12 tablespoons
TEA LEAVES: Fill the filter basket with tea leaves.
GROUND COFFEE: Add filter paper into the filter basket and fill with coee grounds.
TEA BAGS: Fill the filter basket with tea bags or opened tea bags and place them into the
filter basket.
E. Fill the glass carafe with ice cubes to the ICE level marking.
Note: If you want to use cold water instead of ice, fill the glass carafe with water to the
WATER level marking, not the ICE level marking, or the glass carafe will overflow once
the hot tea is brewed into the glass carafe.
F. Place the glass carafe on the drip tray. Tea can be brewed with the cover lid in place.
G. Plug the power cord into the outlet.
H. Adjust the brew strength control to your desired strength, mild to the left and strong to
the right. (See image)