3
Press
Press
Press
kg
lb
st:lb
To install / Replace battery
1. Open battery case cover at the back of the
scale.
2. Install new battery by putting one side of
the battery beneath the battery holder and
then pressing down the other side.
Setting weight unit
This scale is available in kg or lb. You can set
to the one you prefer by pressing the unit
conversion button on the back of the scale
(picture shown on the left). Press the unit
conversion button when scale is powered off.
LCD shows current weight unit. Press the
button again to convert to another weight unit.
. When setting lb as weight unit, the
default height unit is feet/inch.
.
When setting kg as weight unit, the
default height unit is cm.
After selecting the prefered unit, the scale
will auto-off after 3 seconds. The selected
weight unit will be activated the next time
you turn on the scale.
Battery baffle
To Next Page
Loading...
