5
Regular weighing mode
(indicates body weight only)
1. Auto step on weighing
Install batteries
and place the
scale on a hard
and flat floor.
Step on scale
slightly for a while
and wait for weight
reading display.
Reading result
will flash
after weight
stabilized.
2. Consecutive add-on weighing
After digits stabilized, additional loadings can be conducted. Ensure each
add-on loading has to exceed 4.4 lb (2 kg) to get a new reading.
Example: If you want to get a weighing value of your baby, you can weigh
yourself first, and then hold your baby together, without stepping off the
scale. Then you will get the total weight reading. Subtracting the previous
reading of yourself from the new reading, you will get the difference as your
baby’s weighing value.
Hold your baby
without stepping
off the scale.
Digits flash,
stabilized
and locked.
Display total
weight.
To Next Page
Loading...
